Description
Healthy water starts with crystal clear water. Keep your water healthy with the Water Test Kit Strips. Easy to use, single dip water quality test strips which include 15 parameters in a single test. This kit includes 20 test strips.
Test your water in less than 60 seconds without having to mix messy chemicals. Our water test kit strips parameters include the following;
1 pH
2 Total Alkalinity
3 Total Chlorine
4 Hardness
5 Free Chlorine
6 Cyanuric Acid
7 Sulfuretted Hydrogen
8 Nitrate
9 Nitrite
10 Bromine
11 Sulfate
12 Fluoride
13 Kalium
14 Calcium
15 Magnesium
Water Test Kit Strips Instruction
The Allora Water Test Kit is easy to use, and you get your results fast. To get your water quality results follow the test kit instructions below.
- Open the package, remove one strip from the packaging and dip it into the water for a few seconds.
- Remove and wait for 60 seconds holding the test strip horizontally. There is no need to remove excess water.
- Once you have your water quality results appear, compare each parameter with the colour chart on the packaging's rear to get your results.
- If you find that the results are not up to scratch consult your local water quality specialist or local council for a solution.
General Product Information
- When ready to test your water quality, remove the container's strip and replace the cap tightly.
- Store at room temperature and keep away from UV rays and to not expose the container to moisture.
- Please do not remove the test strip from the container unless you intend on using it.
- Keep out of reach from children and refer to the packaging for the used by date.
Store this test kit in a cool, dry place. Exposure to sunlight and moisture will degrade the test pads.
More Water Test Kit Information
For more information on the Allora Water Test Kit Strips, visit our Frequently Asked Questions Page: Water Test Kit FAQ's
