Water Lead Test Kit

Sale!

$34.95 $27.86 Inc GST

The Water Lead Test Kit is designed to be sensitive enough to meet extreamly low levels of lead as per the Australian Drinking Water Guidelines. Easy to use, single dip lead test strips, results in 60 seconds.

  • Free Delivery Australia Wide
  • Australian Drinking Water Guidelines Sensitivity
  • Pack Quantity: 10 Test Strips
  • Lead Test Kit Instruction Sheet
  • Sample Collection Vial
SKU: LTK-10 Category:

Description

We use the latest in technological advancements to provide you with an easy to use, Drinking Water Lead Test Kit that provides results within 60 seconds.

WHAT WILL I GET WITH MY ORDER

  1. 10 Water Lead Test Kit Strips
  2. Free Delivery Australia Wide
  3. Test Kit Instruction Sheet
  4. Test Kit Chart
  5. Water Collection Vial

Lead is a poisonous metal that can cause long-term health and behavioral problems. Drinking water contaminated with lead can cause serious health problems. There is no safe level of lead. Children under six years of age and pregnant women are at the highest risk.

Coming in contact with too much lead can damage the brain, kidneys, and nervous system. In children, lead can also slow development or cause learning, behavior, and hearing problems.

Unlike most other test kits, the Lead Test Kit has been designed to detect extremely low levels of lead in drinking water.

  • 0.005mg/L = SAFE
  • 0.015mg/L = SLIGHTLY OVER
  • 0.030 mg/L = NOT SAFE
  • 0.050 mg/L = NOT SAFE

The Australian Drinking Water Guidelines have defined the ‘safe’ level of lead fit for consumption as 0.01 mg per liter. The figure was recently lowered from 0.05 mg per liter.

LEAD TEST KIT INSTRUCTIONS

  1. Remove one strip from the bottle and replace the cap immediately.(strips must be sealed to protect humidity)
  2. While holding the strip from the opposite end of the test pad,immerse the reagent area (the test pad) of the strip in the water specimen or water stream and wait for 1-2 seconds.
  3. Tap off excess water and wait 60 seconds
  4. Hold the lead test strips vertically and raise the color chart
  5. Compare your results to the chart. Read the test results carefully in a well-lit area with the test pad held near the color chart
  6. Match the test strip colors with the corresponding colors on the chart and record your results.
  7. Changes in color that appear after 60 seconds are of no diagnostic significance.
  8. Discard used test strip

For more information on our Drinking Water Lead Test Kit, please refer to our FAQ's page. Test Kit FAQ's

Additional information

Weight 0.100 kg